Where are the LEDs on the Vector Device?
-
A Status LED Bar is located on the front of the Vector device
-
A Charging Light is located on the top of the Vector device.
For more information on how to charge Vector devices, please see our article Charging Vector Devices.
What does each LED on my Vector Device mean?
Battery LED
|
|
White = Battery level > 30% Red = Battery Level < 30% Flashing Red = Battery Critically Low <10% (30% = approx. 2 hours of battery life remaining) |
|
|
Solid Green = Active connection the GNSS System Flashing Green = Device is searching for GPS lock |
|
|
Red = Active connection to Heart Rate Flashing Red = Device is searching for Heart Rate |
|
|
Solid Amber = Indicates an active connection has been established to a Vector Receiver/Clearsky System Flashing Amber = Device is searching for a Vector Receiver to join. |
|
|
Solid Blue = Active Bluetooth connection is established Flashing Blue = Device is searching for a Bluetooth connection. |
Device charging LED status
-
When a Vector Device is connected in to the Vector Dock and connected to a power source, the Charging Light indicator will illuminate Red when charging and will turn Green when the Device is fully charged.
-
When the Vector Unit is plugged in to the Vector Dock that is NOT connected to a power source, the Charging Light will NOT be illuminated, indicating the device is not charging
In dock ignition mode and data transfer LED status
- When the Vector Device is inserted into the Vector Dock (that is powered on), the GPS LED will illuminate solid white. This indicates the Device has connected successfully with the Dock and is in ignition mode.
- The GPS positional indicator will flash white if the device has failed to connect to your PC. Please reconnect the device and wait for a successful connection.
Comments
0 comments
Please sign in to leave a comment.