Battery LED

Indicates the battery level of the device

• White = Battery level > 30% 
• Red = Battery Level < 30% (approx. 2 hours of battery life remaining)
• Flashing Red = Battery Critically Low <10% (approx. 40 minutes of battery life remaining)

GPS LED

Indicates an active connection to GNSS System

• Solid Green = Active connection the GNSS System
• Flashing Green = Device is searching for GPS lock

Heart Rate LED

Indicates an active connection to Heart Rate

• Red = Active connection to Heart Rate
• Flashing Red = Device is searching for Heart Rate

Ultra-wideband LED

Indicates an active connection has been established to a Vector Receiver/ClearSky system

• Solid Amber = Indicates an active connection has been established to a Vector Receiver/ClearSky System
• Flashing Amber = Device is searching for a Vector Receiver to join

Bluetooth LED

Indicates an active Bluetooth Connection has been established

• Solid Blue = Active Bluetooth connection is established
• Flashing Blue = Device is searching for a Bluetooth connection.

• When a Vector Device is connected to the Vector Dock and connected to a power source, the Charging Light indicator will illuminate Red when charging and will turn Green when the Device is fully charged.

• When the Vector Unit is plugged into the Vector Dock that is NOT connected to a power source, the Charging Light will NOT be illuminated, indicating the device is not charging

Charge Level LEDs

On request, an alternative LED configuration for your device LEDs can be enabled. This will allow a higher level of feedback on the charge status of the device. When this mode is enabled, the tag will show the following patterns on the battery LED. 

• Solid Green - Device is connected and has greater than 80% charge

• Solid Amber - Device is connected and has between 40% (approx. 2 hours) and 79% charge

• Solid Red - Device is connected and has less than 39% (approx. 2 hours) charge

• When the Vector Device is inserted into the Vector Dock (that is powered on), the GPS LED will illuminate Solid White. This indicates the Device has connected successfully with the Dock and is in ignition mode.
• The GPS positional indicator will flash white if the device has failed to connect to your PC. Please reconnect the device and wait for a successful connection.