How to connect Vector Devices to the Computer

How to Connect Devices to your Computer

1. Place the Vector devices into their individual charge case slots in the Vector Dock. Ensure the devices are facing toward the front of the case. 

2. Connect the Dock to a Mains power source if you are not downloading from pitch side. Please see our Vector Dock Overview article for more information on Vector Dock features.

3. Connect the Dock to the PC via the USB Type B to USB Type A USB Cord.

   

4. Power on the Vector Dock by pressing the Dock Power button.

   

5. Allow the Vector Dock to initiate and turn on. This is indicated by the white LED around the Power Button flashing before stabilizing.

6. Once the Vector Dock is powered up the Vector Devices will begin to enumerate (communicate) with the Dock. The GPS LED on the Vector Device(s) will illuminate solid white once the Devices have enumerated. 
   
   NOTE: If the GPS LED on the Vector Device(s) is flashing white, this indicates that the device is not connected. 

7. Open the OpenField console and select 'Data Transfer' from the main tile screen to Download sessions from Devices. For more information on how to download data, please see our Downloading Data article.