Charging the Devices (T6)

How to Charge the Device (T6 Charge Case):

1. Connect the power adapter cord from the power source outlet to the power cable port on the charge case. The Power Light in the Case will turn on when the Case is powered.
   
   
2. Place the devices into their individual charge case slots; ensure the devices are facing toward the front of the case (Device ID's facing back to Hinge). NOTE: This will cause the devices to start charging automatically which is indicated by a flashing and rotating green LED light around the Power Button. When the Device is Fully Charged the LED will be a solid static Green.
   
   
   

How to Charge the Device (Single Cradle):

1. Connect the Single Cradle to a powered USB Port
   
   
2. Plug the device into the Single Cradle, with the Device facing the same direction as the Catapult logo (Device ID facing away from logo). NOTE: This will cause the device to connect to your PC which is indicated by a blue LED around the Power Button. If the device is fully charged the blue LED will be a solid blue. If the devices are in a charging state, the LED will be a rotating and flashing blue. 
   
   
   

For more information on the Device LED behavior, see T6 Hardware Overview

For more information on how to Connect the Devices to a PC, see Connecting Devices to your Computer