In a scenario when you need to stream video down to a tablet on the bench, but don't have access to the wired network infrastructure, you might use a wireless access point to re-stream video wirelessly between devices.

Software Access

• Use Catapult Pro Video account login credentials to log into Focus Client on Mac and iPad while connected to the internet

Connect Mac/PC to Access Point

• Connect to Access Point WiFi
• Go to Network Preferences > Advanced > TCP/IP 

• Change Configure IPv4: field to Manually
• IPv4 Address: 192.168.10.2
• Subnet Mask: 255.255.255.0
• Save

You can save these settings as a Location using the guide below:
https://support.apple.com/en-gb/HT202480

Focus Server Setup

• Open Focus Server > Clients
  • Set server Port [17000]
  • HTTP Port [18080]
  • Set Password Authentication
• Open Focus Client on the Mac > Settings > Server > Connect to Server (Local). Server should be automatically discoverable if open
• Connect Blackmagic Recorder (Use 'Blackmagic Desktop Video Setup' to set SD or HDMI)
• Connect Camera to Mac/PC via Blackmagic recorder
• In Focus Server go to Recorders > Edit in the lower section, select Blackmagic recorder and click ‘Re-streaming’ column, select HLS
• Restart Re-stream

Mac/PC - Focus Client 

• Start Live Session
  • Name Event and Session
  • Select Blackmagic Video Feed
  • Save

Connect iPad to Access Point

• Connect to Access Point WiFi using password on the reverse
• Go to Network Preferences > Advanced > TCP/IP 
• Change Configure IPv4: field to Manually
• IPv4 Address: 192.168.10.3
• Subnet Mask: 255.255.255.0
• Save

iPad - Focus Client

• Focus Settings > Server > Advanced 
  • Server: Remote
  • URL: 192.168.10.2
  • Enter Password
• Home Screen > Open Live Session

Troubleshooting

• In case of playback latency follow this guide on how to reduce it: Video is Buffering During Playback