How to view and edit Live Data on Multiple iPads

Contents of Article

1. Requirements to set up a multi iPad environment

2. Starting a Live Activity on the Vector Live App

3. Connecting a second iPad and enabling Edit or Read Only modes

Requirements to set up a multi iPad environment

Multi iPad environments eliminate the need for the OpenField console and a laptop. It allows users to view or edit data captured live from an Activity straight from one or multiple iPads. 

1. Vector Live App 2.0 needs to be installed on your iPad

2. Device and Receiver Firmware 6.10+ is needed

3. Stand Alone Mode must be toggled off on both iPads

Starting a Live Activity on the Vector Live App

1. Power on the Vector Receiver by pressing the Power Button found on the side of the Receiver. When the Receiver is powered the Battery Status LED will illuminate. 

   

2. Login to the Vector Live app on the main iPad with the same credentials used to login to the OpenField console. Ensure the correct region is selected.

3. From the main iPad, navigate to the Wi-Fi settings and click the Vector Access Point Receiver Wi-Fi credentials. Enter in the password found attached to the back of the Receiver. The Wi-Fi network will be named 'Catapult Receiverxx', where xx = Receiver ID, which is found on the rear of the Receiver.

4. Check for receiver connection in the Vector Live App. Connection is indicated by the green icon in the top right corner of the app. 

   
   

5. Turn the Vector Devices on. Ensure the Vector Receiver's Network Indicator LED is flashing light blue and the Vector Device's Ultra-Wideband LED is solid amber.

6. Press 'Start Activity'.

   

Connecting a second iPad and enabling Edit or Read Only modes

1. From the second iPad, login to the Vector Live app with the same credentials used to login to the first iPad. Ensure the correct region is selected.

2. Navigate to the Wi-Fi settings and click the same Vector Access Point Receiver Wi-Fi credentials and enter in the same password as step 3 above.

3. From the Vector Live App, you will be prompted with a 'Successfully connected' message. Click the 'Join Activity' button.

    

4. From the next menu, if you want to create, edit and delete Periods from the Vector Live App, select 'Edit mode'. If you want to view data only, click 'Read only mode'. 

     

5. For more information on how to use the Vector Live App, please see our Vector Live iPad App - Quick Start Guide.