Charging Vector Devices with the Vector Dock

How to Charge Vector Devices

The Dock itself does not need to be turned on in order for Devices to charge.
A fully depleted Vector Device will take about 90-120 minutes to reach a fully charged state.

1. Place the devices into their individual charge case slots in the Vector dock.

2. Connect the Power Adapter to the Power Input port found on the Vector Dock.

   

3. Connect the Power Adapter to a Power Supply. When the Dock is receiving power the Battery status LED will illuminate green.

   

4. The Devices will begin Charging. Devices charging will have their Charging Light illuminate red. Devices that are fully charged will have their Charging Light illuminate green.

WHAT IS THE EXPECTED BATTERY LIFE OF THE VECTOR DEVICE?

The Vector Device range (S7, G7, X7) expected battery life is approximately 6 hours when fully charged.

Battery Life can be affected by long-term degradation of the battery as well as Device Settings such as Bluetooth use and Wireless data use.

HOW LONG DOES IT TAKE TO CHARGE THE VECTOR DEVICE?

The Vector Device takes approximately 90 - 120 minutes to fully charge from a fully depleted state. 
NOTE: Vector devices will only charge when the Vector dock is plugged into a main power source.