How to Connect Devices to your Computer (EVO Dock):

1. Connect the power adaptor cord from the power source outlet to the power cable port on the EVO Dock. A powered EVO Dock is indicated by a a solid orange LED light in the top right corner of the Dock. 
   

2. Place the devices into their individual Dock slots; ensure the devices are facing toward the front of the case (Device ID's facing back to Hinge). NOTE: This will cause the devices to start charging automatically which is indicated by flashing red LED light on the device. When the Device is Fully Charged the LED will turn a solid red.

3. Connect the USB Cord directly from the EVO Dock outlet to the computer USB port. Press the Blue Power Button in the top right corner of the EVO Dock. NOTE: The Blue Power Button light will flash for ~10 seconds when first turned on before stabilising. The LED light in the top right corner of the Dock will turn green once the case is powered on via the button press. 

4. Once the devices are connected to the computer and the Power button is pressed, check if the devices are connected to the computer by opening up the GPSports console, select settings from the Console Tile Screen and then select the Device Manager tab. The device IDs will appear under the commands tab on the Device Manager screen on the console if the devices are successfully connected.