The Vector 8 Receiver is backwards compatible with OpenField Console 3.17+ and the Vector Live iPad app 2.11+. Athlete profiles, historical data and report templates carry over unchanged.
Connecting to the Vector 8 Receiver
You connect the Vector 8 Receiver the same way as a Vector 7 Receiver, with one addition: you can also connect over your local network.
The Vector 8 Receiver can be connected via:
- USB (OpenField Console only)
- WiFi
- Via Receiver's WiFi Access Point (Connect PC or iPad to the Receiver’s WiFi SSID)
- Via Local WiFi Network (Connect PC or iPad to the same local network the Receiver is connected to)
Connecting via the Receiver’s WiFi Access Point
- On your PC or iPad, open WiFi settings.
- Select the Receiver’s network. It appears as Vector Receiver XX, where XX is the Receiver number.
- When prompted, enter the Receiver’s WiFi password.
You can find the password in the Catapult Vector app under Hardware > select the Receiver > Network Settings.
Connecting via your Local WiFi network
- Connect your PC or iPad to the same network your Receiver uses (the one you set up in the Catapult Vector app, for example your club network).
- Make sure both the Receiver and your PC or iPad have a stable connection to this network where you train.
Confirming Vector 8 Receiver connection
Once connected, OpenField Console and the Vector Live iPad app work the same way as with Vector 7.
-
OpenField Console: Flowing orange bars appear in the top right corner.
-
Vector Live iPad app (standalone): The Start Activity button lights up and shows the number of devices connected to the Receiver.
You can stream data from OpenField Console to Vector Live using the same workflow as Vector 7.
Connecting OpenField Console to Vector 7 Receiver after using a Vector 8 Receiver
If OpenField Console can’t find your Vector 7 Receiver after you’ve used a Vector 8 Receiver, this is expected behaviour.
When OpenField Console is on the same network as a powered-on Vector 8 Receiver, it shuts down the background process it uses to connect to Vector 7 Receivers. That process only restarts when you restart Console.
To connect to a Vector 7 Receiver:
- Power off the Vector 8 Receiver, or connect your PC to a network the Vector 8 Receiver isn’t on.
- Restart OpenField Console.
- Connect to your Vector 7 Receiver as usual.
FAQs
Will Vector 8 change my current workflow?
Not much. On OpenField Console 3.17+ and Vector Live 2.11+, everything works as it does today. The only differences are the new local network connection option and the need to restart Console when switching back to a Vector 7 Receiver.
What happens to my existing data?
Nothing. Athlete profiles, historical data and report templates carry over unchanged.
Can I use a Vector 7 and a Vector 8 Receiver at the same time with the same devices?
No. You can’t capture data from the same devices using both Receivers at once, even on separate Consoles or iPads.
Can I still run a live session with my Vector 7 Receiver on its own?
Yes. Follow the steps in Connecting OpenField Console to Vector 7 Receiver after using a Vector 8 Receiver